Skip to main content
Menu
Close Search

SDSU Design and Construction Standards

SPECIAL NOTE:

THE SDSU DESIGN AND CONSTRUCTION STANDARDS HAVE BEEN UPDATED IN 2018.  PREVIOUS VERSIONS ARE AVAILABLE BY REQUEST.  IF YOU HAVE ANY QUESTIONS PLEASE CONTACT DAVE LAW, DIRECTOR OF PROJECT MANAGEMENT, SDSU FACILITIES AND SERVICES, 605-688-4136. 

___________________________________________________________________________________________________________________________________________________

The design and construction standards have been written to assist architects, engineers, other design professionals, contractors and SDSU staff in understanding the preferences of South Dakota State University in the development, maintenance and repair of its facilities, and to explain the procedures, policies, and basic minimum requirements for materials and products included in construction projects.

It is understood that the basic minimum requirements described within these standards are in addition to the applicable codes and requirements. We have not attempted to repeat the code requirements throughout the Divisions. Where there is no specific recommendation or requirement, the A/E shall exercise their professional judgment. Documents which do not adhere to South Dakota State University standards and procedures for design and construction will be rejected and returned to the A/E for appropriate revisions.

These design and construction standards are in their first edition and will be updated on a regular basis. We have provided the 2012 edition, in the future previous editions will be made available upon request. Future editions will be available below with and without edit marks.

Divisions: 00 Through 09 - GENERAL

Document PREVIOUS UPDATED 
Section 00: Introduction to the Standards 2012 2018
 Section 01: Working Relationships 2015 2018
 Section 02: Codes and Regulations 2012 2018
Section 03: Space and Site Design 2015 2018
 Section 04: Board of Regent Process 2014 2018
 Section 05: Pre-Planning 2012 2018
 Section 06: Schematic Design 2012 2018
 Section 07: Design Development 2012 2018
 Section 08: Construction Documents 2014 2018
 Section 09: Bidding and Construction 2012 2018

Divisions: 1 through 14 and 21 through 33 - TECHNICAL

Document PREVIOUS UPDATE
 Division 00: Sample Documents (For Information Only) 20122018
 Division 01: General Requirements2014 2018
 Division 02: Existing Conditions 2012 2018
 Division 03: Concrete 2012 2018
 Division 04: Masonry2012 2018
 Division 05: Metals2012 2018
 Division 06: Wood Plastic and Composites2012 2018
 Division 07: Thermal and Moisture Protection2012 2018
 Division 08: Openings2012 2018
 Division 09: Finishes2015 2018
 Division 10: Specialties2014 2018
 Division 11: Equipment2012 2018
 Division 12: Furnishings2014 2018
 Division 13: Special Construction2012 2018
 Division 14: Conveying Equipment2014 2018
 Division 21: Fire Suppression 2014 2018
 Division 22: Plumbing2014 2018
 Division 23: HVAC2015 2018
 Division 26: Electrical2015 2018
 Division 28: Electronic Safety and Security 2015 2018
 Division 31: Earthwork 2015 2018
 Division 32: Exterior Improvements2012 2018
 Division 33: Utilities2012 2018

Standard Details

Document Original Update    
 10-010: Accessible Toilet -Elevation 2012  10-010: Accessible Toilet -Elevation 2012 
 10-020: Toilet Partition - Elevation 2012  10-020: Toilet Partition - Elevation 2012 
 10-030: Restroom Sink - Elevation 2012  10-030: Restroom Sink - Elevation 2012 
 10-040: Urinal - Elevation 2012  10-040: Urinal - Elevation 2012 
 23-010: Condensate Receiver 2012201523-010: Condensate Receiver 2012
23-010: Condensate Receiver 2015
 23-020: Steam Main Drip Trap 2012201523-020: Steam Main Drip Trap 201223-020: Steam Main Drip Trap 2015
 23-030:        
 23-040: Outside Air Intake 20122015​23-040: Outside Air Intake 201223-040: Outside Air Intake 2015
 23-050: Shell and Tube Heat Exchanger 2012201523-050: Shell and Tube Heat Exchanger 201223-050: Shell and Tube Heat Exchanger 2015
 23-060: Condensate Receiver Detail   2015

 


23-060: Condensate Receiver Detail 2015
 23-060: Standard Coil Piping Diagram   2015  23-060: Standard Coil Piping Diagram 2015
 23-065: Steam Trap   2015  23-065: Steam Trap 2015
 23-066: Steam Main Drip Trap (Revised)   2015  23-066: Steam Main Drip Trap (Revised) 2015
 23-070: Steam Safety Relief Valve   2015  23-070: Steam Safety Relief Valve 2015
 23-075: Steam Coil Piping 2   2015  23-075: Steam Coil Piping 2015
 23-080: Pressure Reducing Valves   2015  23-080: Pressure Reducing Valves 2015
 23-090: ERV heat-Cool Coil Piping   2015  23-090: ERV heat-Cool Coil Piping 2015
 23-095: Fan Coil Unit Piping Diagram   2015 
23-095: Fan Coil Unit Piping Diagram 2015
 23-100: Cabinet Unit Heater Piping Detail   2015  23-100: Cabinet Unit Heater Piping Detail 2015
 23-110: Outside Air Intake Detail (Revised)   2015 
​23-110: Outside Air Intake Detail (Revised) 2015
 23-120: Return Air Boot   2015  23-120: Return Air Boot 2015
 23-130: Cooling Coil Drain Trap Detail   2015 
23-130: Cooling Coil Drain Trap Detail 2015
 26-010: Parking Lot Light Base 2012  26-010: Parking Lot Light Base 2012 
 26-020: Yard Light Base 2012 

26-020: Yard Light Base 2012

 
 26-030: Small Light Base 20122015  26-030: Small Light Base 2015
 26-040: ADA Card Access   2015 

26-040: ADA Card Access 2015

 26-041: Card Access   2015  26-041: Card Access 2015
 32-010: Bollard 2012201532-010: Bollard 2012​32-010: Bollard 2015
 32-020: Splashblock 2012201532-020: Splashblock 201232-020: Splashblock 2015
 32-030: Curb & Gutter 2012201532-030: Curb & Gutter 2012​32-030: Curb & Gutter 2015
 32-040: Sidewalk Joints 2012201532-040: Sidewalk Joints 201232-040: Sidewalk Joints 2015
 32-050: Valley Gutter 20122015
32-050: Valley Gutter 2012
32-050: Valley Gutter 2015
 32-060: Fillet Section 2012201532-060: Fillet Section 2012
​32-060: Fillet Section 2015
32-070: Corner Curb Ramp w/Diamond SDSU Standard 2012201532-070: Corner Curb Ramp w/Diamond SDSU Standard 201232-070: Corner Curb Ramp w/Diamond SDSU Standard 2015
32-075: Corner Curb Ramp - Options 20122015
32-075: Corner Curb Ramp - Options 2012
32-075: Corner Curb Ramp - Options 2015
32-080: Area Inlets   2015 
32-080: Area Inlets 2015
 32-085: Sewer Manhole   2015  32-085: Sewer Manhole 2015
 33-010: 7 ft. x 6 ft. Utility Tunnel 2012201533-010: 7 ft. x 6 ft. Utility Tunnel 2012
33-010: 7 ft. x 6 ft. Utility Tunnel 2015
 33-020: Transformer Pad 2012201533-020: Transformer Pad 201233-020: Transformer Pad 2015

Supplemental Design Guides

Campus Master Plans
2025 Campus (Facility) Master Plan
2025 Athletics Plan for Master Facilities
Brookings Area Master Transportation Plan
Jack Rabbit Green Master Plan 2010
McCrory Gardens Master Plan 2011
Parking Study 2010
Residential Life Dining Services Master Plan 2011
SDSU Signage and Wayfinding Program
 
General Supplemental Design Guides
Building Programming Process and Format (Schematic Design Booklet)
FICM Partial Chapter 4
General Classroom Standard
Grounds Management Plan
Landscape and Site Design Development Check List
Review Comments Form
Room Numbering Policy
Sample A/E Agreement
SDSU DP Monthly Progress Report
SDSU Hydronic System Check List
SDSU Parking Rules and Regulations
SDSU Standard Pipe Schedule
SDSU Building Program
SDSU Symbols and Legends
Services for New Floor Installation
Site Programming Discussion Guide
US National CAD Standard
 
Campus Policies of Interest
SDSU Public Art Policy