This system provides a portable method to do UT (Ultrasonic Testing) for samples that cannot be brought into the lab for evaluation in METLABs immersion system. Battery operated, hand held, stand-alone data acquisition system with full A, B, & C-scan capabilities. It quickly assesses the presence, depth, shape, and orientation of cracks, flaws, corrosion/erosion, delaminations, and internal anomalies in a variety of structures, materials, and surfaces. This unit can operate as a conventional thickness meter, a basic flaw detector (with RF display and alarm gates) or in either active B-scan or full C-scan data acquisition, display, and analysis. It can be integrated with virtually any available single or dual-axis scanner (with standard interfaces) manual or automated with conventional or dry-coupled UT transducers. METLAB primarily uses this machine to do testing for our clients. We also have an electro-polishing unit for sample preparation. Contact us to discuss your project by email or phone: 605-688-4300
This machine can be used to determine:
- Functions: Thickness gauge, flaw detector, A-, B-, or full C-scan.
- Pulse Voltage: 50 - 300 V turnable spike
- Pulse Width: 50 - 1000 ns
- Pulser Repetition Rate:50 Hz - 1 kHz
- Bandwidth: 250 kHz - 20 MHz
- Selectable Receiver Gain Range 80 dB
- A/D Resolution: 10 Bits
- Maximum A/D Rate: 100M Samples per second - 10 MHz
- Operation Modes: A-scan, B-scan, flaw/thickness, or full C-scan modes
- UT Operation Mode: Pulse-echo and through transmission
- Gates: 2 independent gates with separated gate delay, width controls, synchronization threshold and detection threshold
- Scanner: 2-axis manual or automated scanner interface
- Battery Life: Up to 4-hours
- Screen Operation: Freeze, waveform recall, zoom, pan, and reference memory
- Report Generation: Report Generation
- METLAB uses this machine for both research and testing for our clients. Contact us to discuss your project by email or phone: 605-688-4300
Manufacturer's Website :