Skip to main content
Menu
Close Search

NANOVEA Nano/Micro Hardness & Scratch Tester

NANOVEA Nano/Micro Hardness & Scratch Tester

This system can be used for microscopic and nanoscopic hardness and scratch testing and can be used to determine hardness, young’s modulus, and creep information about materials, protective coatings, and thin films. METLAB uses this machine for both research and testing for our clients. Contact us to discuss your project by email or phone: 605-688-4300 

 

Test Space

Nanovea Microscope Imaging System: Optical Magnification – 50x, 200x and 500x Nano Mechanical Module: Scratch and Hardness nano-module Loading system for 0 – 400mN loading range Resolution down to 0.003mN High Resolution Capacitor Depth Sensor (resolution 0.1nm) Nano Mechanical Module: Scratch micro-module Loading system for 0–40N loading range Resolution down to 0.75mN Depth measured with Z motor encoders (resolution of 10nm) Nanovea Scratch Software Package:Complete scratch testing Scratch at constant or increasing loads Multi-pass scratch testing for linear wear evaluation Precise control of all the scratch parameters such as scratch length, scratch speed and loading rate Nanovea Hardness Software Package: Micro-Hardness Analysis Software Depth versus load curves Hardness & Young’s modulus Creep

 

Key Features :

  • Microscopic hardness testing
  • Microscopic scratch testing
  • Nanoscopic hardness testing
  • Nanoscopic scratch testing

 

Manufacturer's Website:

Nonovea - A better measure